Unsolved
This post is more than 5 years old
2 Posts
0
9899
Optiplex 260 stuck in power save/standby
Hey everybody
I have a Optiplex 260 stuck in standby mode for the monitor. Have tried three montitors with same result. All monitors test fine when detached from the box.
I have shut it down multiple times, unplugged/replugged all connections several times, etc.
I was replacing and old monitor with a new Dell 17 inch flat panel when this error occurred, but now it seems stuck on the previous monitor as well.
The flat panel shows analog input is fine, and that power saving mode is on and that touching the keyboard or mouse will unfreeze--but of course when you try this it does nothing but stay in standby.
Any ideas?
TIA
nelson
I have a Optiplex 260 stuck in standby mode for the monitor. Have tried three montitors with same result. All monitors test fine when detached from the box.
I have shut it down multiple times, unplugged/replugged all connections several times, etc.
I was replacing and old monitor with a new Dell 17 inch flat panel when this error occurred, but now it seems stuck on the previous monitor as well.
The flat panel shows analog input is fine, and that power saving mode is on and that touching the keyboard or mouse will unfreeze--but of course when you try this it does nothing but stay in standby.
Any ideas?
TIA
nelson
DELL-Jesse L
Moderator
Moderator
•
17K Posts
0
June 9th, 2005 17:00
neubanks,
Thank you for using the Dell Community Forum.
Does your system have integrated video? If the monitors are working on other systems the problem is not the monitor but, more the video card or Windows. If your system has integrated video you may want to contact Dell Support. If you have a pci or agp video card try removing and reseating it into the slot.
neubanks
2 Posts
0
June 13th, 2005 11:00
PeteyD
14 Posts
0
August 8th, 2005 13:00
Same problem with a Dimension 4600, LCD stuck in power save. Reinserting the video card did the trick. Thanks.
Been monkeying with powersave options, another thread suggested a conflict between screen saver and power save (standby) timed settings...?
Pete