Unsolved
This post is more than 5 years old
3 Posts
0
385585
U2414H Banding using sRGB preset.
My monitor is exhibiting banding with the sRGB preset. It doesn't do this on the Standard preset, but I would like to use the sRGB preset since that's the one that was factory calibrated. Is there anything I can do to correct this?
DELL-Chris M
Community Manager
Community Manager
•
54.9K Posts
0
January 11th, 2016 08:00
Did you use the OSD (On Screen Display) to Reset to Factory defaults? Post a picture of all the modes.
Jay Rockets
3 Posts
0
January 12th, 2016 08:00
No, I didn't reset to Factory Defaults. I wasn't sure if doing that would overwrite the factory calibrations. All I've done is change between preset modes and adjust brightness. I don't have a camera. I'm one of the few people who don't own a cellphone and who aren't Amish. But this is what is listed:
Standard
Multimedia
Movie
Game
Paper
Color Temp.
sRGB
Custom Color
DELL-Chris M
Community Manager
Community Manager
•
54.9K Posts
0
January 13th, 2016 07:00
Factory default does not over write calibrations. I would reset and check all modes.
Jay Rockets
3 Posts
0
January 16th, 2016 11:00
I haven't installed the driver disc or ICC profile. Should I use the disc, or download the most recent version? Is the ICC profile on the disc related to the factory calibrations, or does every monitor get the same profile?
DELL-Chris M
Community Manager
Community Manager
•
54.9K Posts
0
January 16th, 2016 16:00
Install the driver from the File Library. The driver includes the INF, ICM (ICC), CAT files.
Luca974
4 Posts
0
September 28th, 2017 17:00
Some gradient banding problem also on my new U2414H.
I had think it was related to low source video quality but i can see banding problem also on Spotify and Steam interface and on some videoclips in game (Witcher 2).
On this test page www.lagom.nl/.../gradient.php instead the banding problem is almost invisible.
Video Card Sapphire HD7870
OS Windows 10
Input Color Format: RGB
Preset Mode: sRGB
I would like to know if the author of this thread solved his problems.
What can I do to try to solve it?