Unsolved
This post is more than 5 years old
9 Posts
0
1587
UP2516D, DUCCS 1.5.12 will not install
I have a Dell Ultrasharp UP2516D that is till running on the Calibration Solution 1.5.3 because software updates have consistently failed. I tried to update to the current 1.5.12 and installation failed somewhere in the Wizard installing the X-Rite Device Services Manager. The Calibration Tool appears to have installed the first part of the update OK, but running it failed when a .dll was missing (the screen changed before I could write it down). At least my monitor still worked (unlike the effort to upgrade to 1.5.10 when I was left with a black screen).
Two questions:
1. Are the improvements in 1.5.12 relative to 1.5.3 sufficient to justify the aggravation of working through the problems? (I did note that 1.5.10 was the first to specifically support this monitor)
2. What do I need to do to get the installation to complete?
I am running a Dell Studio XPS 9100, Windows 7 SP1 64bit, Nvidia Quadro K600.
Thanks
DELL-Chris M
Community Manager
Community Manager
•
54.9K Posts
0
August 22nd, 2016 09:00
If you are happy with the calibrated results of 1.5.3, I would not worry about the newer versions of DUCCS.
Listed below are the changes =
Version 1.5.12:
• Added support for the UP3017Q
Version 1.5.11:
• Added support for the UP3017Q
• Last calibration date and time will show for selected Calibration preset
Version 1.5.10:
• Added support for U2516D and U2716D
• Added new version XRD (X-Rite Devices Services), version 2.4.0
• Added support for Apple OSX 10.11.x El Capitan.
Version 1.5.9:
• Only supports UP3216Q
• Added support for Windows 10
Version 1.5.8:
• Auto-update bug fix
• Multiple application bug fixes
Version 1.5.7:
• Dropped support for Apple OS X 10.6.x, and 10.7.x
• Added support for Apple OSX 10.9.x, and 10.10.x
• Added support for UP2715K
• Added DCI-P3 emulation to the list of color spaces
• Added progress bar for gamma upload
• Bug fix: Dual display (of same display model) will now allow calibration/profiling of both displays
• Updated the XRD (X-Rite Devices Services) component of application to version 2.3.5
Version 1.5.3:
• Added support for UP2414Q, UP3214Q
• Added uniformity functionality during calibration steps (supported on the UP2414Q and UP3214Q displays only)
Version 1.5.2:
• Added support for Apple
• Added support for UP2414Q
• Added support for Windows 8.1 32/64
Version 1.5.1:
• Moved Dell Ultrasharp Calibration Solution to new User Interface (UI)
• The new UI allows User to create display profiles for non-Dell monitors, can create printer profiles, Scanner profiles, and
the ability to perform other related function
• Added support for UP3214Q
Version 1.0.1:
• Added support for Windows 8 32/64
emallen1
6 Posts
0
January 17th, 2018 15:00
DELL-Chris M
Community Manager
Community Manager
•
54.9K Posts
0
January 18th, 2018 08:00
emallen1,
You replied to an older UP2516D thread, yet stated that you have the U2716D? Going to assume that you meant UP2716D.
How can I check the firmware on my monitor to see if it is the proper version?
* It is not listed in the OSD (On Screen Display) Menu. All you can do is run the firmware update. It will notify you of what version is currently installed and what version it will load.
Does it still need a firmware update before installing DUCCS?
* Yes.
Can I try installing DUCCS without the firmware update?
* No, it will fail.
emallen1
6 Posts
0
January 18th, 2018 18:00
Hi Chris, Actually I do have a U2716D. Does that make a difference?
emallen1
6 Posts
0
January 18th, 2018 18:00
oops!! Ignore the previous reply. It is UP2716D.
Thanks,
emallen1
6 Posts
0
January 18th, 2018 18:00
Hi Chris, Actually I do have a U2716D. Does that make a difference?