Unsolved
This post is more than 5 years old
5 Posts
0
3183
Backup failed with "NO error"
Hi All,
Backup failed for windows client with "NO error" error.
Client: Windows 2008 R2
Backup server: Linux
Networker: 8.2.1.4
When i checked on /tmp/sg found below error message.
_______________________
61320:savefs: Cannot bind socket to connection port in configured port range on system The requested address is not valid in its context.
61320:savefs: Cannot bind socket to connection port in configured port range on system The requested address is not valid in its context.
61320:savefs: Cannot bind socket to connection port in configured port range on system : The requested address is not valid in its context.
61320:savefs: Cannot bind socket to connection port in configured port range on system : The requested address is not valid in its context.
61320:savefs: Cannot bind socket to connection port in configured port range on systemThe requested address is not valid in its context.
97512:savefs: Cannot access NetWorker server '': Remote system error - The requested address is not valid in its context.
bingo.1
2.4K Posts
0
September 23rd, 2015 03:00
"No error" does not mean that there is "no error" - it is simply the feedback to express that the software could not get an error code (in time).
A retry will usually run successfully. Otherwise I recommend to increase the client retries for the group.
crazyrov
4 Operator
4 Operator
•
1.3K Posts
0
September 23rd, 2015 04:00
Hi Vinesh,
Does you backup server or the client machine have multiple NIC cards on it ? There is a possibility that the requested IP is not known to the destination system.
crazyrov
4 Operator
4 Operator
•
1.3K Posts
0
September 24th, 2015 01:00
Any additional information that you can provide to your issue, from the whatsapp forum I understand that your issue is still not resolved.
- Try a client initiated backups which will allow you to get a clearer error. If you don't get it with verbose set debug level 5 and try again.
ble1
2 Intern
2 Intern
•
14.3K Posts
0
September 24th, 2015 14:00
It looks like client run out of the available ports or something similar. Most likely, you will find some other errors in event log.
vinesh_pandit
5 Posts
0
September 28th, 2015 00:00
Client have 2 IPs assigned.
Vinesh Pandit
IT Technology Consultant
SAP Labs India, 138, Export Promotion Industrial Park, Whitefield, Bangalore 560 066, India
T + 91 80- 4329-1794 | M +91 9902200311
Recognized as 5th Best Company to work for in India.
1 Attachment
image001.png
crazyrov
4 Operator
4 Operator
•
1.3K Posts
0
September 28th, 2015 04:00
Hi vinesh.pandit@sap.com,
Could you also share the output of the of the following commands :
On the Client :
- save -D5 -s <backup_server> -b
- rpcinfo -p
- netstat -a | grep -i
- nsrports
ON the backup server :
- rpcinfo -p
- netstat -a | grep -i
- nsrports
* Please note, replace all the <> with appropriate values before running the commands.
vinesh_pandit
5 Posts
0
September 29th, 2015 19:00
Reboot of server resolved the issue ☺
Vinesh Pandit
IT Technology Consultant
SAP Labs India, 138, Export Promotion Industrial Park, Whitefield, Bangalore 560 066, India
T + 91 80- 4329-1794 | M +91 9902200311
Recognized as 5th Best Company to work for in India.
1 Attachment
image001.png