Unsolved
This post is more than 5 years old
100 Posts
0
1853
Cannot open save session with tank
Problem with EBS 7.6 Solaris Backup Server and Red Hat Linux EBS Client.
Can anyone help me to fix it?
Mike
32493:savegrp: kocrostage1:probe started
savefs -s tank -c kocrostage1 -g Default -p -l full -R -v
64690:savegrp: savegrp:Default * kocrostage1:All See the file /nsr/tmp/sg/Default/sso.kocrostage1.xyaGxe for output of save command.
7340:savegrp: kocrostage1:probe succeeded.
7076:savegrp: --- Probe Summary ---
kocrostage1:All level=full, dn=-1, mx=0, vers=ssbrowse, p=4
kocrostage1:All level=full, pool=RAC11G, save as of Wed May 26 11:14:13 2010
kocrostage1:/ level=full, dn=0, mx=4, vers=ssbrowse, p=4
kocrostage1:/ level=full, pool=RAC11G, save as of Wed May 26 11:14:13 2010
kocrostage1:/home level=full, dn=0, mx=4, vers=ssbrowse, p=4
kocrostage1:/home level=full, pool=RAC11G, save as of Wed May 26 11:14:13 2010
kocrostage1:/usr level=full, dn=0, mx=4, vers=ssbrowse, p=4
kocrostage1:/usr level=full, pool=RAC11G, save as of Wed May 26 11:14:13 2010
kocrostage1:/var level=full, dn=0, mx=4, vers=ssbrowse, p=4
kocrostage1:/var level=full, pool=RAC11G, save as of Wed May 26 11:14:13 2010
kocrostage1:/boot level=full, dn=1, mx=1, vers=ssbrowse, p=4
kocrostage1:/boot level=full, pool=RAC11G, save as of Wed May 26 11:14:13 2010
kocrostage1:index level=full, dn=-1, mx=0, vers=ssbrowse, p=4
kocrostage1:index level=full, pool=RAC11G, save as of Wed May 26 11:14:13 2010
7241:savegrp: nsrim run recently, skipping
No full backups of this save set were found in the media database; performing a full backup
39077:save: error, no matching devices for save of client `kocrostage1'; check storage nodes, devices or pools
5777:save: Cannot open save session with tank
dpinink_silva
724 Posts
0
June 1st, 2010 05:00
Mike,
The error is this one: 39077:save: error, no matching devices for save of client `kocrostage1'; check storage nodes, devices or pools
Verify those configurations to allow kocrostage1 to save to a device. Probably you have restrictions somewhere and just need to add that client in the list of allowed clients
msswest
5 Posts
0
June 2nd, 2010 04:00
As stated above the resolution for the pool yields no available drives to use.
The pool this data would go to seems to be RAC11G. Verify that this is the expected pool, if not check pool settings for savegroup, client, level and saveset.
If the above pool is correct, check which drives are usable by this pool. Then check which storagenode(s) you have selected for the client kocrostage1. It is likely that the storagenode selected for the client, does not have a writable drive in the pool.
Either update the pool or the client settings to make sure the client can backup to pool RAC11G.
hari_prakash
22 Posts
0
June 2nd, 2010 06:00
Hi Mike,
This is due to the selection of target devices under "RAC11G" media pool.
Check for the appropriate devices & re-run the backups.
HTH.