Unsolved
This post is more than 5 years old
44 Posts
1
36426
Default Username & Password for NMC
Hi All,
I have installed new Networker 7.1 with SP1. When i try to use NMC, it doesnt accept the default usename and password (administrator & administrator).
If anyone has got the correct logon authentication, please help me....
I have installed new Networker 7.1 with SP1. When i try to use NMC, it doesnt accept the default usename and password (administrator & administrator).
If anyone has got the correct logon authentication, please help me....
amediratta
2K Posts
0
February 20th, 2008 22:00
NMC uses port 2638 form the NMC server, check if it is available for use. Sybase back-end in NMC needs it so if any other application is using Sybase, you need to remove that one.
mohas
44 Posts
0
February 21st, 2008 02:00
Is there any other possiblities to recover....
ble1
2 Intern
2 Intern
•
14.3K Posts
0
February 21st, 2008 05:00
amediratta
2K Posts
0
February 21st, 2008 05:00
mohas
44 Posts
0
February 28th, 2008 20:00
I tried resetting it... and restarted the service too...
But still it doesnt work...
Any clue....
Regards,
Mohideen
amediratta
2K Posts
0
February 29th, 2008 01:00
Did you get the chance to check on ports?
Sebc1
7 Posts
0
March 3rd, 2008 09:00
pwd : password
doster1
31 Posts
0
March 6th, 2008 01:00
ble1
2 Intern
2 Intern
•
14.3K Posts
0
March 10th, 2008 11:00
You can can reset the password as mentioned in admin guide (the only trick is you need to restart box), In case you really really need it badly and nothing helps then support may try to do it via iAnywhere tools.
mohas
44 Posts
0
March 15th, 2008 08:00
The version is 7.1 with SP1. How do we resolve this issue...? Should i upgrade to 7.3...?
Thanks in advance..
ble1
2 Intern
2 Intern
•
14.3K Posts
0
March 28th, 2008 11:00
AkshayB1
17 Posts
1
April 3rd, 2008 09:00
Try the below steps.
Reseting the Administrator Password to the Default on Windows Systems
1. From the Start menu, go to Control Panel>System and set the GST_RESET_PW variable in the Environment Variables dialog box to a value of 1.
2. Reboot the system.
When the GST Service starts, the password resets.
3. Log in to the Console server as administrator, with the default password of administrator.
4. The password can now be set to a secure password once again.
5. Return to the Environment Variables dialog box and delete the GST_RESET_PW variable.
6. Reboot the system.
7. Log in to the Console server as administrator by using the secure password.
Reseting the Administrator password to the default on Solaris and Linux systems
1. Set GST_RESET_PW to a non-null value:
set GST_RESET_PW
2. Stop and restart the gst service with a reboot, or enter:
/etc/init.d/gst stop
/etc/init.d/gst start
The password resets.
3. Log in to the Console server as administrator, with the password of administrator.
4. The password can now be set to a secure password once again.
5. Set GST_RESET_PW back to null:
set GST_RESET_PW (press Enter, without assigning a value)
6. Stop and restart the gst service:
/etc/init.d/gst start
7. Log in as administrator by using the secure password.
guenterH1
117 Posts
0
December 15th, 2011 06:00
Please also make sure not have Java newer than 1.6 update 26 installed on yout PC.
Newer version may also cause such problems.
Please check for the latest customer ETA documentation regarding the dependencies of NW release and Java.
coganb
736 Posts
1
December 15th, 2011 06:00
Hi,
The instructions on how to do this are in the Administration Guide, page 412. Let us know if it doesn't work.
regards,
-Bobby
coganb
736 Posts
0
December 15th, 2011 06:00
ETA is here:
http://solutions.emc.com/EMCSolutionView.asp?id=esg125257&usertype=C
-Bobby