This post is more than 5 years old
12 Posts
1
7873
Download NetWorker 9.1 Module for Databases and Applications
Hello dear colleagues
Where I can download the subj ?
I could find only page with download links which point to NetWorker 9.0 distributives.
https://community.emc.com/docs/DOC-51611
On the same time Module for Database Applications 9.1 Product Documentation mention lgtonmda-9.1.0.2-1.x86_64.rpm
https://www.emc.com/collateral/TechnicalDocument/docu81607.pdf
There's a chance to download exact 9.1.0.2 version ?
Thanks in advance
edwgiz
12 Posts
0
February 13th, 2018 09:00
EMC support recommended to change the version because 9.0.1.2 is unavailable for downloading
ftp://ftp.legato.com/pub/NetWorker/Cumulative_Hotfixes/9.1/
ftp://ftp.legato.com/pub/NetWorker/NMDA/9.1.1/
https://support.emc.com/downloads/1129_NetWorker-Module-for-Databases-and-Applications
bingo.1
2.4K Posts
0
February 12th, 2018 03:00
ftp://ftp.legato.com/pub/NetWorker/NMDA/9.0.1/9.0.1.2
wlee
263 Posts
0
February 12th, 2018 07:00
On the same time Module for Database Applications 9.1 Product Documentation mention lgtonmda-9.1.0.2-1.x86_64.rpm
https://www.emc.com/collateral/TechnicalDocument/docu81607.pdf
I checked this link and document, and found no reference to lgtonmda-9.1.0.2-1.x86_64.rpm
Are you sure you have the correct version? I am able to find nmda 9.1.0.3, but not 9.1.0.2.
Can you not use the latest versions: 9.1.0.6, 9.1.1.5, or even 9.2.1.1?
edwgiz
12 Posts
0
February 12th, 2018 11:00
You are right there's another document where 9.1.0.2 is mentioned: the NMDA installation guide
https://www.emc.com/collateral/TechnicalDocument/docu81609.pdf
edwgiz
12 Posts
0
February 13th, 2018 09:00
The required version is 9.0.1.2
bingo.1
2.4K Posts
0
February 14th, 2018 07:00
??? I am used quite a bit but this reason is weird - and it is wrong and confusing:
"EMC support recommended to change the version because 9.0.1.2 is unavailable for downloading"
But in general, I wolud also use the latest compatible version.
tkrajeesh
1 Rookie
1 Rookie
•
15 Posts
0
September 14th, 2020 21:00
Hi, I am unable to modify my sql client, what could be the reason ?
bingo.1
2.4K Posts
0
September 15th, 2020 01:00
1. Is this issue really related to the the opening question? - if not please open a new case.
2. I doubt your statement, unless you use an account which does not have sufficient rights. But of course (as always) you cannot rename any resource.
crazyrov
4 Operator
4 Operator
•
1.3K Posts
0
September 17th, 2020 05:00
@tkrajeesh, go here - https://www.dell.com/community/NetWorker/bd-p/networker and click on "Start Discussion" on the top of the topic list.
tkrajeesh
1 Rookie
1 Rookie
•
15 Posts
0
September 17th, 2020 05:00
Hi,
Extremely sorry to bother you, i am new in this forum, how do i open a new case please advise