Unsolved
This post is more than 5 years old
11 Posts
0
2008
Inventory when depositing a tape?
I upgraded from Networker 8.2.2.5 to 8.2.3.1 and everything is working great - except one thing.
When I deposit a tape from the import ports it used to inventory them automatically.
Now they don't and I have to manually inventory them.
Fast inventory (-II) fails and a normal inventory loads the tape into the drive.
Is this something that changed in 8.2.3.1 or is something messed up with my media DB?
bingo.1
2.4K Posts
0
May 24th, 2016 19:00
The reason could be the introduction of the new media db (SQLite replaces WISS).
It it possible that such is just an unique extra verification.
Let me suggest you withdraw and re-reposit a known tape. Maybe NW then will behave 'the old way'.
bingo.1
2.4K Posts
0
May 24th, 2016 20:00
What also came into my mind is a new option for the jukebox resource which is set by default.
Cade Robinson
11 Posts
0
May 25th, 2016 06:00
I thought that too - that an unload and reload would get it sane. Not so much.
ndbku01:~ # nsrjb -S 2
Jukebox ndbku01: (Ready to accept commands)
slot volume pool barcode volume id recyclable
2: 000002(R) 1Month 000002 2751505714 yes
ndbku01:~ # nsrjb -S 2 -w -P 1
05/25/16 08:22:11.082627 Info: Operation `read elements status' is in progress on jukebox `ndbku01'.
05/25/16 08:22:11.082777 Info: Moving media from slot 2 to port 1.
05/25/16 08:22:11.082808 Info: Withdrawing 1 cartridges.
05/25/16 08:22:11.082834 Info: Remove any cartridges from the ports.
Jukebox operation finished with status: succeeded
ndbku01:~ # nsrjb -S 2 -d -Y -P 1
05/25/16 08:24:17.431167 Info: Operation `read elements status' is in progress on jukebox `ndbku01'.
05/25/16 08:24:17.431338 Info: Moving media from port 1 to slot 2.
05/25/16 08:24:17.431370 Info: Depositing 1 cartridges.
Jukebox operation finished with status: succeeded
ndbku01:~ # nsrjb -S 2
Jukebox ndbku01: (Ready to accept commands)
14119:nsrjb: No volumes labeled.
slot volume pool barcode volume id recyclable
2: -* 000002 -
*not registered in the NetWorker media data base
ndbku01:~ # nsrjb -I -S 2
05/25/16 08:30:14.647450 Info: Updated volume `000002' in slot 2.
05/25/16 08:30:14.647590 Info: Operation `Eject' in progress on device `/dev/nst4'
Jukebox operation finished with status: succeeded
ndbku01:~ # nsrjb -S 2
Jukebox ndbku01: (Ready to accept commands)
slot volume pool barcode volume id recyclable
2: 000002(R) 1Month 000002 2751505714 yes
ble1
2 Intern
2 Intern
•
14.3K Posts
0
May 25th, 2016 07:00
Try also 8.2.3.2. I personally never used withdraw and deposit via nsrjb (I always used sjimm and then I would reset and quick inventory lib).
StuartWhitby
45 Posts
0
May 25th, 2016 08:00
I'd raise a case for this one. NetWorker engineering seem to have lost focus on tape libraries and it's quite possible that this is simply some kind of oversight in the interaction between nsrjb and the new media db in 8.2.3.
Cade Robinson
11 Posts
0
May 25th, 2016 08:00
Just updated to 8.2.3.2 and didn't help.