This post is more than 5 years old
26 Posts
0
441
NMC issue
Hi,
Port 9000 is used by the different application.
Is there a way to change the config so that NMC could use 9001 or 9002?
This post is more than 5 years old
26 Posts
0
441
Hi,
Port 9000 is used by the different application.
Is there a way to change the config so that NMC could use 9001 or 9002?
Top
Rajesh Sekar
26 Posts
0
October 25th, 2012 03:00
Hi Bobby,
Thanks It worked fine.
coganb
736 Posts
0
October 25th, 2012 03:00
Hi,
Here's an article on how to do this:
http://solutions.emc.com/EMCSolutionView.asp?id=esg111311&usertype=C
Alternatively, you could re-install the NMC software and pick different ports when prompted.
-Bobby