Unsolved
This post is more than 5 years old
86 Posts
0
3178
Scanning Libaries - Reconfigure Libraries
I have deleted jukebox library in order to recreate it. Then I have right clicked Libraries and select "Scan for Devices", and then I have chosen yes for scanning all LUNs. The scanning is not giving library in red as I expect, and I could not proceed any further. What is the problem? Can I use some line command sto solve the problem?
Operating system on Networker Server is MS Windows 2003.
42506 11/23/2009 3:49:43 PM 2 0 0 3892 3888 0 MyNetworkerServernsrd media info: No configured libraries detected on storage node srv9-1mail.mydom.local. 42506 11/23/2009 3:49:43 PM 2 0 0 3892 3888 0 MyNetworkerServernsrd media info: End ing dvdetect process on host 'srv9-1mail.mydom.local'... 42506 11/23/2009 3:49:44 PM 2 0 0 3892 3888 0 MyNetworkerServernsrd media info: Sea rching for NetWorker SCSI devices on 'server9-2'...terminated 42506 11/23/2009 3:49:44 PM 2 0 0 3892 3888 0 MyNetworkerServernsrd media info: Sea rching for NetWorker SCSI devices on 'server1-2iis.mydom.local'... 42506 11/23/2009 3:49:44 PM 2 0 0 3892 3888 0 MyNetworkerServernsrd media info: Sea rching for NetWorker SCSI devices on 'server1-2iis.mydom.local'...terminated 42506 11/23/2009 3:49:50 PM 2 0 0 3892 3888 0 MyNetworkerServernsrd media info: Fin ished searching for new backup devices.
pereubu
86 Posts
0
November 23rd, 2009 07:00
It is not, and that might be the problem.
C:\Documents and Settings\Administrator>inquire
scsidev@0.0.0:DGC RAID 5 0326|Disk, \\.\PHYSICALDRIVE0
S/N: CK200071900247
WWNN=xxxxxxxxxxx
PORT=00000001
scsidev@0.1.0:DGC RAID 5 0326|Disk
scsidev@0.2.0:DGC RAID 5 0326|Disk
scsidev@0.3.0:DGC RAID 5 0326|Disk
scsidev@0.4.0:IBM ULTRIUM-TD3 64D0|Tape, \\.\Tape0
S/N: 1210266394
ATNN=IBM ULTRIUM-TD3 12102663
94
WWNN=xxxxxxxxx
WWPN=xxxxxxxx
PORT=00000001
scsidev@4.0.0:DGC RAID 5 0326|Disk
scsidev@4.1.0:DGC RAID 5 0326|Disk
scsidev@4.2.0:DGC RAID 5 0326|Disk
scsidev@4.3.0:DGC RAID 5 0326|Disk
C:\Documents and Settings\Administrator>inquire
scsidev@0.0.0:DGC RAID 5 0326|Disk, \\.\PHYSICALDRIVE0
S/N: CK200071900247
WWNN=556666
PORT=00000001
scsidev@0.1.0:DGC RAID 5 0326|Disk
scsidev@0.2.0:DGC RAID 5 0326|Disk
scsidev@0.3.0:DGC RAID 5 0326|Disk
scsidev@0.4.0:IBM ULTRIUM-TD3 64D0|Tape, \\.\Tape0
S/N: 1210266394
ATNN=IBM ULTRIUM-TD3 12102663
94
WWNN=xxxxxxxx
WWPN=xxxxxxxx
PORT=00000001
scsidev@4.0.0:DGC RAID 5 0326|Disk
scsidev@4.1.0:DGC RAID 5 0326|Disk
scsidev@4.2.0:DGC RAID 5 0326|Disk
scsidev@4.3.0:DGC RAID 5 0326|Disk
HCLBACKUP
150 Posts
0
November 23rd, 2009 07:00
pereubu
86 Posts
0
November 23rd, 2009 08:00
Neither jbconfig gives solution:
C:\Documents and Settings\Administrator>jbconfig
Jbconfig is running on host server10-1rd.fplus.local (Windows Server 2003 5.2),
and is using server10-1rd.fplus.local as the NetWorker server.
1) Configure an AlphaStor Library.
2) Configure an Autodetected SCSI Jukebox.
3) Configure an Autodetected NDMP SCSI Jukebox.
4) Configure an SJI Jukebox.
5) Configure an STL Silo.
6) Configure a Microsoft Removable Storage Jukebox.
What kind of Jukebox are you configuring? [1] 2
14484:jbconfig: Scanning SCSI buses; this may take a while ...
14486:jbconfig:
There appear to be no SCSI jukeboxes connected to this system.
This could mean the SCSI jukebox(es) are not connected to the system,
cannot be seen (pending a reboot) or have already been configured.
14487:jbconfig: On Windows Systems, this could mean that the SCSI jukebox(es) ar
e
enabled for Microsoft Removable Storage.
14488:jbconfig:
Please rerun the program after making the necessary changes.
pereubu
86 Posts
0
November 23rd, 2009 08:00
HCLBACKUP
150 Posts
0
November 23rd, 2009 08:00
It does not have to take anything with license. The inquire output shows two drives which means only the autochanger is not visible. You can try with a reboot of the server. It may work.
HCLBACKUP
150 Posts
1
November 23rd, 2009 08:00
pereubu
86 Posts
0
November 23rd, 2009 08:00
It is not even in any of Device Managers. The very moment the library was deleted on Networker Server, it has disappeared on DriverManager as well. I do not know why it is not visable to OS. The jukebox is ADIC Scalar 24 310A/Autocharger.
I was told that something has to be done, to be visable. It looks like hardware problem and that is not visable. Maybe licence?
HCLBACKUP
150 Posts
0
November 23rd, 2009 08:00
In the output of the inquire there is no autochanger shown. This happens when the jukebox is not visible to the OS. Check the device manager. I expect there also autochannger will not be there. First you need to make sure that library is visible at OS level then only you can configure it in NetWorker.
pereubu
86 Posts
0
November 30th, 2009 04:00
HCLBACKUP
150 Posts
0
November 30th, 2009 04:00