Unsolved
This post is more than 5 years old
1 Message
0
10891
5548 Switch Stack Crash
Hello,
I'm running a pair of 5548's stacked. I'm seeing the switches crash occasionally with this error message:
27-Jul-2013 12:42:03 :%OS-F-MEMORY: OSMEMG_rn_free: Memory magic is invalid
I'm running the latest software:
Unit SW version Boot version HW version
------------------- ------------------- ------------------- -------------------
1 4.1.0.10 1.0.0.14 00.00.02
2 4.1.0.10 1.0.0.14 00.00.02
Anyone have any suggestions? I've got better logging in place now, so when it crashes again, hopefully I have more detail I can post on it.
Thank you.
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
July 29th, 2013 11:00
I could not find a lot of info on this error. But this is what I would look into.
First I would check and see if there is a common command or Web GUI task that you perform, that causes this behavior. Or even check the type of traffic on the network when the issue comes up. If there is a trigger that is causing this type of behavior we can use it to do further troubleshooting.
If we cannot find a trigger then I would proceed with re-flashing the firmware to the same one it is already at.
www.dell.com/.../powerconnect-5548
Another thing we can try is switching which switch is the master, and see if the issue still occurs.
Keep us updated.
Thanks.