Skip to main content
Start a Conversation

Unsolved

This post is more than 5 years old

heshoots

17 Posts

18565

June 10th, 2010 14:00

6224 MIB

Good Day All,

I have a PowerConnect 6224 running the latest and greatest firmware 3207. I have SNMP configured on it but I am not getting what I expect too so I am wondering what parts of the MIB that they sent along with the firmware I need to load. I am looking for CPU, MEMORY, TEMP and INT STATUS.

I would greatly appreciate any help that could be given.

 

Regards,

vt1012

212 Posts

June 11th, 2010 09:00

Here are the sensor OIDs used for the 6224.  Each interface status can be found in the if-MIB/ifTable. 

Temperature

  • .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.8.1.2
  • .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.8.1.3
  • .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.8.1.4

CPU

  • .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3.1.2
  • .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3.1.3

Memory

  • .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.1
  • .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.2

Power Supplies

  • .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.7.1.2
  • .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.7.1.3

Fans

  • .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.6.1.2
  • .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.6.1.3
  • .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.6.1.4
  • .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.6.1.5

View More

View All

No Events found!

Top