This post is more than 5 years old
2 Posts
0
65967
Auto Logout after 180 sec. inactivity (http and https)
All my N4032 and N3024 switches with 6.2.7.2 firmware automaticlly break http and https session after ~180 seconds of inactivity. Commands:
line telnet
exec-timeout x
don't work
Does anyone have a similar experience?
Is this a known issue?
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
1
February 10th, 2016 08:00
Looking through the firmware release notes, it looks like this was a known issue, that http/https was not following the exec-timeout setting. The command # ip http timout-policy, was added in 6.2.6.6. I would test altering the timeout setting using the command # ip http timeout-policy.
Example from release notes:
console(config)#ip http timeout-policy idle 3600 life 86400
Let us know if this works.
TomG_G
2 Posts
0
February 10th, 2016 23:00
It works !
Thank you DELL-Daniel C
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
February 11th, 2016 08:00
Glad to hear! thanks for the update.