Unsolved
This post is more than 5 years old
1 Rookie
•
38 Posts
0
689
March 21st, 2020 01:00
Connect S5248F and Z9100 switches
Hi,
Can I connect S5248F and Z9100 switches using a 100GbE to 4x25GbE breakout cables where:
- the 100GbE QSFP28 end goes to 1x switch port on the Z9100 switch
- the 4x 25GbE SFP28 ends go to 4x switch ports on the S5248F-ON switch
If yes, could you please point me to relevant documentation?
If the connection with the breakout cables is not supported, what's the best alternative to connect both switches?
Thanks.
No Events found!
DELL-Josh Cr
Community Manager
•
9.7K Posts
•
43.4K Points
0
March 23rd, 2020 08:00
Hi,
It has not been validated. You can try it, probably will work.
slunav
1 Rookie
•
38 Posts
0
March 23rd, 2020 09:00
Hi Josh,
Many thanks for confirming.
Best regards,
Sebastian
slunav
1 Rookie
•
38 Posts
0
March 23rd, 2020 09:00
Hi Josh,
Sorry, one last question regarding this.
Could you please let me know what would be the validated or recommended way to connect the S5248F and Z9100 switches?
Best regards,
Sebastian