Unsolved
This post is more than 5 years old
14 Posts
0
55405
March 11th, 2016 00:00
Creating DHCP Server on DELL X1018P
Hi All,
Actually I have some question for creating DHCP Server per VLAN based on DELL X1018P.
I want to creating DHCP for 2 VLAN :
VLAN 10 --> port 1 - 10 (192.168.2.xxx/24)
VLAN 20 --> port 11 - 14 (192.168.3.xxx/24)
And what should I configure if I want the Management IP on VLAN 10.
Please kindly need your help regarding to this.
No Events found!
JohnLike
14 Posts
0
March 11th, 2016 16:00
Hi Daniel, thanks for the tips...
So I have to create another VLAN interface (Add IPv4 addressing) for each pool.
For this example, I should add VLAN 10 and VLAN 20 ip address on IPv4 Addressing.
For VLAN port, what should I use for each port? switchport general or switchport access?
And I have running error when I try adding/creating new interface VLAN ( add IPv4 addressing). I cannot connect to management (GUI) either using IP address on the VLAN 1 or IP address that I just create for VLAN 10.
Do you have any sugestion for this?
JohnLike
14 Posts
0
March 17th, 2016 01:00
I think on X1018P can only use one VLANIF.
So when I add/configure VLANIF on different VLAN, like VLAN3.
The VLANIF1 become Static with "no IP" and the VLAN3 have the IP.