Unsolved
This post is more than 5 years old
90 Posts
0
128967
May 27th, 2014 04:00
Dell N3048 - Jumbo Frame support per port
Hi,
Can we enable Jumbo frame on a per port basis on the N3048.
I remember we could do this using the PowerConnect 6224.
I just need to turn on 9000+ mtu on specific ports...
Thanks.
No Events found!
ZianPaul
90 Posts
0
May 27th, 2014 18:00
I checked, the manual on the web interface and per port u can set the MTU rating....
I guess we can configure each port with a different MTU setting
Katoomba
1 Message
0
February 6th, 2022 15:00
You can only set the mtu size at system level. There is no way to set the mtu on an interface by interface basis. You configure system mtu size as shown below:
#system jumbo mtu