Unsolved
1 Message
0
163
Dell PowerConnect 6248
Hey I come from HP switching gear and I'm in the process of learning Dell Powerconnects as that's what my new employer uses... I'm struggling with the trunking part. In the HP world if I wanted to "Daisy" chain two switches together I would login to both switches and setup trunking and set the ports that I was using as my trunk uplinks. However I can't find anything remotely close to this in the Dells. I'm assuming I need to setup a few LAGG ports. I was hoping someone with more experience could lead me in the right direction.
DELL-Young E
Moderator
Moderator
•
3.6K Posts
0
June 12th, 2022 18:00
Creating LAG in PC6248 switch(Sample configuration)
Switch 1
console(config)# interface ethernet 1/g11
console(config-if-Gi1/0/11)# channel-group 1 mode auto
console(config-if-Gi1/0/11)# exit
switch 2
console(config)# interface ethernet 1/g11
console(config-if-Gi1/0/11)# channel-group 1 mode auto
console(config-if-Gi1/0/11)# exit
This is the LAG configuration in PC6248 switch.
Also please refer to this: https://dell.to/39fBokr