Unsolved
This post is more than 5 years old
2 Posts
0
2932
Dell Switch Z9100 'show inventory' command
Hi,
When giving command 'show inventory', service tag information does not show, it shows NA, can you tell me why and how to fix it, thank you.
#show inventory
System Type : Z9100-ON
System Mode : 1.0
Software Version : 9.10(0.2P2)
Unit Type Serial Number Part Number Rev Piece Part ID Rev Svc Tag Exprs Svc Code
--------------------------------------------------------------------------------------------------------------
* 1 Z9100-ON-01-FE-34 NA X00 X00 NA NA
Good example:
#show inventory
System Type : Z9100-ON
System Mode : 1.0
Software Version : 9.10(0.2P2)
Unit Type Serial Number Part Number Rev Piece Part ID Rev Svc Tag Exprs Svc Code
--------------------------------------------------------------------------------------------------------------
* 1 Z9100-ON-01-FE-34 NA A02 A02
DELL-Daniel My
Moderator
Moderator
•
6.2K Posts
0
September 24th, 2018 13:00
Hello
It does not appear your switch is programmed with service tag. I would guess that you have an X revision switch that was intended for development or demo purposes since your revision shows X00.
Thanks
Tom_Tom
2 Posts
0
September 25th, 2018 10:00
Thank you for your response.
Is there a way to add this service tag information now? Is there a procedure to do that?
Thank you,
DELL-Daniel My
Moderator
Moderator
•
6.2K Posts
0
September 25th, 2018 10:00
No.