I have reading a lot about about quality and service and the 5524 and 6024 switches but I am not sure how to set it up.
On or net we have asterisk servers handling voip traffic and I would like have quality of service regarding the sound (rtp streams), anyone knows how to enable this so the sound (rtp streams) are proritized?
You will need to first create a class using the Global Configuration command:
console(config)#class-map match-all <class_name>
This will take you into class configuration mode. After this you can decide which traffic to match. There are a lot of options, use # match ?, to help find the category you want to use. As an example one of the options are "protocol", so you could then type "match protocol ?" for definitions or examples of what is expected. Once your class is defined, create a policy.
Specify the class ,you creating earlier, that you want to be used in the policy.
console(config-pmap)# class <class_name>
And set the value.
console(config-pmap-c)# set queue 6
That covers the basic configuration. Here is a good article that covers the 5524 switch. A lot of the commands and behavior is the same on the 6224.
Page 681 of the user guide details enabling QoS on the 6224.
Let us know how things work out.