FC Configuration on Dell MXL 10/40gbe switch

Hi Guys,

I'm configuring FC on Dell MXL 10/40gbe switch os version 9.11  but in the show fc switch command the switch mode fport didn't change to NPG and there is nothing appear in Brocade 6505 san switch os version 8.1.2 ?

MXL(conf)#feature fc
MXL(conf)#dcb-map san-dcb-map    
MXL(conf-dcb-map san-dcb-map)#priority-group 0 bandwidth 50 pfc off
MXL(conf-dcb-map san-dcb-map)#priority-group 1 bandwidth 50 pfc on
MXL(conf-dcb-map san-dcb-map)#priority-pgid 0 0 0 1 0 0 0 0
MXL(conf-dcb-map san-dcb-map)#exit
MXL(conf)#interface vlan 1110
MXL(conf-if-vl-1110)#exit
MXL(conf)#fcoe-map san-mxl-01       
MXL(conf-fcoe-map san-mxl-01)#fabric-id 1110 vlan 1110
MXL(conf-fcoe-map san-mxl-01)#fc-map 0efc01
MXL(conf-fcoe-map san-mxl-01)#keepalive
MXL(conf-fcoe-map san-mxl-01)#fcf-priority 128
MXL(conf-fcoe-map san-mxl-01)#fka-adv-period 8
MXL(conf-fcoe-map san-mxl-01)#exit
MXL(conf)#interface range fiberChannel 0/41-42
MXL(conf-if-range-fi-0/41-42)#fabric SAN-MXL-01
MXL(conf-if-range-fi-0/41-42)#no shut
MXL(conf-if-range-fi-0/41-42)#exit
MXL(conf)#interface range tengigabitethernet 0/1-2
MXL(conf-IF-te-0/1-2)#dcb-map san-dcb-map
MXL(conf-IF-te-0/1-2)#fcoe-map san-mxl-01
MXL(conf-IF-te-0/1-2)#exit