Unsolved
This post is more than 5 years old
37 Posts
0
22481
Firmware 3.3.2.3 for PC62xx released but not downloadable?
Firmware 3.3.2.3 for PC62xx seems to be released but is not downloadable.
Filesize is 0 bytes.
anyone already got it and could share it?
Thanks
Thilo
dhandjr
2 Posts
0
November 28th, 2011 14:00
Ok, but no other option is available. Luckily I had 3.3.1.10 already downloaded.
ThiloWunderlich
37 Posts
0
November 28th, 2011 14:00
I asked Dell support about this and they told me the release is not supposed to show up on the website now. I will be released later.
dhandjr
2 Posts
0
November 28th, 2011 14:00
I'm having the same issue. Even though it is 0K bytes, it will download 110TDIAG.EXE, which is a Dell Powervault diagnostics utility.
Anyone able to download the correct file?
Donald.
TimJWatts
31 Posts
0
November 29th, 2011 08:00
It will be released publicly in a couple of days apparently. I got handed a copy by email by support to try to fix a problem I'm having, when they noticed the website had gone doolally.
ThiloWunderlich
37 Posts
0
November 29th, 2011 14:00
whar problem did it fix for you? I'm seeing some problems with the 3.3.1.10 release, I'd like to see resolved. And before talking for hours on the phone with the support, it would be easier to see whats already solved.
TimJWatts
31 Posts
0
November 29th, 2011 23:00
It didn't in the end. I still have the problem.
Spazz79
1 Message
0
November 30th, 2011 10:00
Website has a clitch but you can download the previous version here:
ftp://ftp.dell.com/firmware/pc6200v3.3.1.10-release.zip
sf3wire
7 Posts
0
December 12th, 2011 14:00
there is a working link now, I'm donwloading the zip from here:
www.dell.com/.../DriverDetails
ro230006
1 Message
0
September 11th, 2012 15:00
Buyer Beware! I work for a large company and we have been getting new switches (6248) at this firmware level and are unable to enable flowcontrol. This has serious inpact on throughput performance in the large database environment.
DELL-Willy M
802 Posts
1
September 11th, 2012 17:00
Have you tried the latest version of the firmware that was released 7/25/12, version 3.3.4.1? Is the issue that you are having with flow control only with firmware revision 3.3.2.3? Here is a link for the current firmware available:
www.dell.com/.../powerconnect-6248
Hope this helps,
Keep us updated if you can.