This post is more than 5 years old
2 Intern
•
126 Posts
0
14561
LAG configuration issue 5324
I have a PowerConnect 5324 with a very simple configuration. 1 VLAN (not ID #1) which includes 20 single ports and 1 4-port LAG group. The LAG group connects to a PowerConnect 2748 which is the lab's backbone switch. The problem is that when I've had to power cycle the 5324, it loses the LAG configuration, however. the VLAN still contains the 20 individual ports assigned to it. Why would it not save the LAG membership, but does retain the rest of the VLAN information?
Can anyone shed some light on this? I don't see any other sort of button that I need to click to save the LAG data once i've made the changes to it.
Thanks
BeekerC
bh1633
909 Posts
1
February 9th, 2011 15:00
The configuration must be saved explicitly.
Use the System>File Management>Copy Files webpage to to copy the running-config to the startup-config after configuring your LAG.
Or on the CLI:
console> enable
console # copy running-config startup-config
beekerc
2 Intern
2 Intern
•
126 Posts
0
February 9th, 2011 17:00
That's the ticket.
Thanks
BeekerC