Unsolved
8 Posts
0
1120
OSPF with cisco L3 switch
HI all,
what will be the command to set up OSPF on N3048 with cisco switch?
N3048 manual there no process ID for OSPF, which cisco use.
router ospf 61008
redistribute static subnets
network 10.10.10.100 0.0.0.3 area 0.0.0.0
network 172.16.16.0 0.0.0.255 area 0.0.0.0
network 192.168.10.0 0.0.0.255 area 0.0.0.0
remy-ch
26 Posts
0
June 22nd, 2020 06:00
I didn't try it, but it's probably the IP address.
As it's IPv4 you can see it on the CISCO :
sh ip ospf neighbor
owen1991
8 Posts
0
June 22nd, 2020 19:00
LOC-L3#sh ip ospf neighbor
Neighbor ID Pri State Dead Time Address Interface
200.6.13.98 1 FULL/BDR 00:00:35 199.100.24.98 Vlan1001
PLOC-L3#sh ip ospf
Routing Process "ospf 61008" with ID 199.98.200.15
so does that mean, on dell switch the router id : 199.98.200.15