Unsolved
This post is more than 5 years old
17 Posts
0
182942
OpenManage Network Manger 6.1
I install the OMNM 6.1 software in a company to more easily administer the switches . At first , I managed to synchronize the switches that communicates with software, but I can not have details on the switches. 5not even details CPUr, memory usage ,no temperature,
Can you help me , please .
YohanC
17 Posts
0
February 8th, 2016 08:00
I install the OMNM 6.1 software in a company to more easily administer the switches . At first , I managed to synchronize the switches that communicates with software, but I can not have details on the switches, not even details . (no CPU, no memory usage , no temperature, )
Can you help me , please ?
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
February 8th, 2016 12:00
We would be happy to help troubleshoot with you. What model switches are you monitoring? What firmware are these switches on?
YohanC
17 Posts
0
February 9th, 2016 00:00
Thank you for your help, I watch the powerconnect type switches .
Dell powerconnect 3424 ,Firmware: 1.0.1.01
Dell PowerConnect 5548 ,Firmware: 1.0.0.14
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
February 9th, 2016 08:00
It sounds like you are look at the boot code version, and not the firmware revision. Firmware on the 5548 should be at 4.1.0.20: http://dell.to/1Xhsylh . Firmware on the 3424 should be on 2.0.0.34: http://dell.to/1Wb7Q59 .
Are these the only 2 devices being monitored? I believe trial version has a limited number of devices it can monitor at one time.
When you perform the discovery the switches show up correct? Just not able to pull any information? Do the switches have the same SNMP community?
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
February 9th, 2016 08:00
Here is a video that walks us through the discovery process. This can be helpful in ensuring no steps were missed.
http://bit.ly/1nVCaph
YohanC
17 Posts
0
February 10th, 2016 01:00
Thank you for your help .
I'm sorry I gave you the wrong firmware , this is actually the 2.0.0.34 release. For testing on this software I managed to make the discovery of my switches, however I still can not to have details such as traffic flow , no graphics are displayed, I can not see data which transiste on different ports.
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
February 10th, 2016 07:00
Can you show us some screen shots of what you are seeing on the OMNM page? This may help us get a better understanding of what is and is not being displayed. OMNM uses SNMP to poll those statistics, can you share with us how you have SNMP configured on both of the switches?
YohanC
17 Posts
0
February 10th, 2016 09:00
1 Attachment
HOME PAGE OMNM.PNG
YohanC
17 Posts
0
February 10th, 2016 09:00
Voici quelques capture d'écran du logiciel OMNM
YohanC
17 Posts
0
February 10th, 2016 09:00
Traffic Flow
1 Attachment
traffic flow.PNG
YohanC
17 Posts
0
February 10th, 2016 10:00
Performance
1 Attachment
performance.PNG
YohanC
17 Posts
0
February 10th, 2016 10:00
Authentification SNMP
1 Attachment
authentification3.PNG
YohanC
17 Posts
0
February 10th, 2016 10:00
Equipement
1 Attachment
detail equipement.PNG
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
February 10th, 2016 13:00
Thanks for those images. Can you share with us the SNMP config on the switches? Another troubleshooting step you can take, is to perform an SNMPWalk on the switches. This will help ensure that the switches are responding properly.
http://bit.ly/1TT44if
YohanC
17 Posts
0
February 15th, 2016 02:00
I want to backup my configuration and can be restored, can you tell me how?