PowerConnect vlan routing question

Firstly I do not know what i am doing. I got hold of a 7024 to learn.

I have the following setup

Laptop (192.168.1.100 255.255.255.0) -> NAT Router (192.168.1.1 255.255.255.0) -> PC7024 (Trunk VLAN 192.168.1.73 255.255.255.0, vlan 2 192.168.2.2)-> workstation (192.168.2.3)

Question
My laptop can reach 192.168.2.2 but not the workstation on 192.168.2.3. I have a static route set up in the NAT router to redirect all 192.168.2.0/24 traffic to 192.168.1.73. How do i configure vlan routing?