Unsolved
2 Posts
0
660
PowerConnect vlan routing question
Firstly I do not know what i am doing. I got hold of a 7024 to learn.
I have the following setup
Laptop (192.168.1.100 255.255.255.0) -> NAT Router (192.168.1.1 255.255.255.0) -> PC7024 (Trunk VLAN 192.168.1.73 255.255.255.0, vlan 2 192.168.2.2)-> workstation (192.168.2.3)
Question
My laptop can reach 192.168.2.2 but not the workstation on 192.168.2.3. I have a static route set up in the NAT router to redirect all 192.168.2.0/24 traffic to 192.168.1.73. How do i configure vlan routing?
DELL-Josh Cr
Moderator
Moderator
•
8.7K Posts
0
May 20th, 2019 10:00
Hi,
Use the ip routing command. Page 974 https://downloads.dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_networking/esuprt_net_fxd_prt_swtchs/powerconnect-7024_reference%20guide_en-us.pdf