Unsolved
12 Posts
0
1068
Routing out to Internet Dell N2048
Hey Guys, I have inherited a client and had to get a leased line and new switching infrastructure in place and mimic the old config. There are 3 VLANs on the switches. A Server VLAN(1) 192.168.0.0/24 A PC VLAN(3) 192.168.3.0/24 and a point to point/trunk VLAN(2) 192.168.254.0/24 that connects the L3 switches to the pfSense hardware Firewall. Routing is working across the VLANs as it should but I cannot get out to the internet via the switches which have the firewall device 192.168.254.254 as the next hop. There are 2 x DNS servers on the internal domain 192.168.0.1/2 that dish out DHCP and the switches set the network route out. If I connect direct into the pfSense I can get out to the internet fine, I have setup OpenVPN and when I connect I can get to all of the internal VLANs so routings are working that way. Many thanks david
DELL-Josh Cr
Moderator
Moderator
•
8.5K Posts
0
January 25th, 2019 10:00
Hi,
Do you have the default gateway set as the firewall or do you have a static route? What does the route table show?
Coops7
12 Posts
0
January 28th, 2019 07:00
Hey Josh, I have a static route --> IP route 0.0.0.0 0.0.0.0 192.168.254.254 5 (IP route.jpg)
and the port I have set Gi1/0/47& 48 - a bit of trial and error
Route table is
If there is a better way I can do this - rather than trying to mimic that would be awesome!
Thanks
david