4 Posts
0
1663
S4048ON switch stack disable SNMP trap and enable SNMP server
We have 2 S4048ON switch connected in a stack. How to disable SNMP trap and enable SNMP server for the stack.
What are the configuration to be done to enable SNMP.
Thank you for your support
Paul
DELL-Joey C
Moderator
Moderator
•
3.4K Posts
0
September 7th, 2021 01:00
Hello @R Paul,
I've consulted on one of the switch support colleague, to disable SNMP trap, you can run the command #no snmp-server enable traps ecmp. In order for you to enable SNMP server, you will need to configure snmp-server in your server and configured it. Then based snmp-server configured on system, you have to configure snmp-server community, view, groups etc on switch.
Here the switch user guide for reference: https://dell.to/3lhntwv page 1532 onwards.
frederickalliston
4 Posts
1
September 13th, 2021 00:00
To enable the SNMP trap on your device you need to make some changes to your server configure SNMP-server and it will be enabled. For disabling the same run a #no SNMP-server enable traps ecmp command on your device. This will definitely help in enabling and disabling the SNMP trap.