Unsolved
This post is more than 5 years old
6 Posts
0
3304
March 14th, 2019 21:00
S4048T-ON port channel routing
I have 2 S4048T-ON switch on port-channel mode. Will they share the routing tables even if I only configured the first switch with routing (the router is attached only to the first switch)?
No Events found!
DELL-Josh Cr
Community Manager
•
9.7K Posts
•
43.5K Points
0
March 15th, 2019 10:00
Hi,
Are the switches stacked? If they are the stack master settings are what will be used. If they are not stacked the port channel is just connecting the switches.
speakerperez
6 Posts
0
March 17th, 2019 23:00
They are not stacked, only port channeled.,since both of the switches have their own VLAN tables (which is similar to one another). Currently i'm testing this using only 1 switch, works fine. I'm wondering if i started to turn ON the second switch, will the routing be applied on it or not. Or should i include routing rule on the 2nd switch same on my first switch?
DELL-Josh Cr
Community Manager
•
9.7K Posts
•
43.5K Points
0
March 18th, 2019 07:00
I would put the routing rule on the second switch.
speakerperez
6 Posts
0
March 18th, 2019 19:00
hi, thanks. i'll try to include routing table on both switch.