Unsolved
This post is more than 5 years old
2 Posts
0
856
Switch N2048
Hi all,
I have three switches in stack. And I have one device, when I connect to any port do not communication.
Led not flashing.
Device is OK, I tested on my NB.
Thank for all reply, and I'm sorry, my english is so bad.
Martin
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
June 28th, 2016 08:00
What kind of device are you plugging into the switch? This switch does not support half duplex operation. If the device you are plugging into the switch is an older device that operates at half duplex, this could be the reason.