Unsolved
This post is more than 5 years old
37 Posts
0
8487
November 25th, 2013 10:00
Triple Switches Dell 6248 stacked LAgging
I have triple switches stacked. I was wondering if its possible to setup link agression accross different ports on the three swithces
eg switch 1 port 2 lag with switch 2 port 2 and so on.
No Events found!
DELL-Josh Cr
Community Manager
•
9.7K Posts
•
43.3K Points
0
November 25th, 2013 11:00
Hi,
Yes you can do that, it basically treats the stack as a single large switch so LAGs can have ports on multiple switches in the stack.
DELL-Josh Cr
Community Manager
•
9.7K Posts
•
43.3K Points
0
November 25th, 2013 12:00
Yes, it is the same as creating a LAG on a single switch, select the interfaces and add them to a port channel ftp://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_powerconnect/powerconnect-6248_Reference%20Guide_en-us.pdf p439 and in the user manual p386 ftp://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_powerconnect/powerconnect-6248_User%27s%20Guide2_en-us.pdf
elec999
37 Posts
0
November 25th, 2013 12:00
How would I do this, just set a LAG number?