Unsolved
This post is more than 5 years old
4 Posts
0
22472
March 27th, 2015 05:00
Update enclosure tag on B22 fex
hi,
I search how can i update the "Enclosure" tag in Fex description on my M1000e blades company.
when i make "sh fex detail" on Nexus5xxx , i have only this description.
| SWITCH# sh fex 103 FEX: 103 Description: C02-AG15 state: Online FEX version: 7.0(2)N1(1) [Switch version: 7.0(2)N1(1)] Extender Serial: FOC1649R0EN Extender Model: N2K-B22DELL-P, Part No: 73-14668-02 Bay: A1 Enclosure: Dell M1000e Slot A1 Service Tag: 4****** Pinning-mode: static Max-links: 1 Fabric port for control traffic: Eth1/5 FCoE Admin: false FCoE Oper: true |
It-is possible to change this tag ?
thx.
fred
No Events found!
DELL-Josh Cr
Community Manager
•
9.6K Posts
•
43.1K Points
0
March 27th, 2015 12:00
Hi Fred,
What are you wanting to change it to? That looks like an accurate location for the enclosure tag. I am not seeing a way to change the tag. I checked the nexus guides from Cisco but did not find a command to do it.
fredMasson
4 Posts
0
March 30th, 2015 02:00
i search to change the "Enclosure description" this information is a TAG in the blade OA , but when I see the Fex information on my Nexus , i see always "DELL M1000".
For example with the HP Blade , i can change this TAG .
FEX: 111 Description: C01-BY07-HP state: Online
FEX version: 7.0(5)N1(1) [Switch version: 7.0(5)N1(1)]
FEX Interim version: 7.0(5)N1(1)
Switch Interim version: 7.0(5)N1(1)
Extender Serial: FOC***********
Extender Model: N2K-B22HP-P, Part No: 73-13780-05
Bay: 1
Rack: SS1-BY07-C01
Enclosure: SS1-BY07-C01
Rack Id: Default RUID
Card Id: 145, Mac Addr: fc:99:47:ad:2a:c2, Num Macs: 64
It is important for the administrators to make the relation beetween FEX and BLADE when your have one network team and one server team.
f.masson
DELL-Josh Cr
Community Manager
•
9.6K Posts
•
43.1K Points
0
March 30th, 2015 10:00
Try using our commandline utility into the CMC and using the command setchassisname
http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=D0JCN&fileId=3364977248&osCode=WS8R2&productCode=poweredge-m620&languageCode=EN&categoryId=SM
fredMasson
4 Posts
0
March 31st, 2015 05:00
hi,
i had chenged then chassis name , with "racadm setsysinfo chassis_name" command , and no change the description.
it's possible to change it , because some Blades have the default description , and other i have the Service-tag information.
FEX: 104 Description: C01-BL28 state: Online
FEX version: 7.0(2)N1(1) [Switch version: 7.0(2)N1(1)]
Extender Serial: FOC1649R0E7
Extender Model: N2K-B22DELL-P, Part No: 73-14668-02
Bay: A1
Enclosure: 562N6W1
Service Tag: 562N6W1
Pinning-mode: static Max-links: 1
Fabric port for control traffic: Eth1/7
FCoE Admin: false
FCoE Oper: true
FCoE FEX AA Configured: false
Fabric interface state:
Po104 - Interface Up. State: Active
Eth1/7 - Interface Up. State: Active
Eth1/8 - Interface Up. State: Active
SIR2-AY28-N5K-55# sh fex 105
FEX: 105 Description: C02-BL28 state: Online
FEX version: 7.0(2)N1(1) [Switch version: 7.0(2)N1(1)]
Extender Serial: FOC1649R09G
Extender Model: N2K-B22DELL-P, Part No: 73-14668-02
Bay: A1
Enclosure: Dell M1000e Slot A1
Service Tag: HW1N6W1
Pinning-mode: static Max-links: 1
Fabric port for control traffic: Eth1/9
FCoE Admin: false
FCoE Oper: true
FCoE FEX AA Configured: false
Fabric interface state:
Po105 - Interface Up. State: Active
Eth1/9 - Interface Up. State: Active
Eth1/10 - Interface Up. State: Active
SIR2-AY28-N5K-55#
DELL-Josh Cr
Community Manager
•
9.6K Posts
•
43.1K Points
0
March 31st, 2015 10:00
Try this one racadm setsysinfo -c chassislocation
fredMasson
4 Posts
0
April 1st, 2015 00:00
hi ,
yes, i make it , but no change operate on the fex information .
have you a other idea ?
thks
DELL-Josh Cr
Community Manager
•
9.6K Posts
•
43.1K Points
0
April 1st, 2015 08:00
Here is the reference guide for the cli commands, http://topics-cdn.dell.com/pdf/dell-cmc-v5.0-m1000e_Reference%20Guide_en-us.pdf
I am not seeing anything else in there that would change the fex location.