This post is more than 5 years old
12 Posts
0
25725
Update firmware on 6248 Stack?
Guys,
Any idea why the tftp operation will only copy the 3.3.5.5 firmware to one of the two 6248's in the stack?
Thanks,
TVB
This post is more than 5 years old
12 Posts
0
25725
Guys,
Any idea why the tftp operation will only copy the 3.3.5.5 firmware to one of the two 6248's in the stack?
Thanks,
TVB
Top
VandenTR
12 Posts
1
July 26th, 2013 09:00
Update: I went into the web interface and switched the Unit Type from "StackMember" to "Management" and after reconnecting, both units showed that the updated firmware version was loaded.
Now I just need to pull the trigger on the upgrade to 3.3.5.5!
VandenTR
12 Posts
0
July 25th, 2013 15:00
VandenTR
12 Posts
0
July 26th, 2013 08:00
Dan,
Can you provide the steps involved to break the stack before and restore it after the upgrade?
Thanks,
TVB
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
July 26th, 2013 08:00
There was a similar forum post last year, but the forum user never updated with what they did to get things updated. I would schedule some time to break the stack. Update each switch individually and then once updated stack them back together.
Keep us updated.
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
July 26th, 2013 08:00
Here is a great white page on stacking the 6200, including adding and removing stack members.
www.dell.com/.../pwcnt_stacking_switches.pdf
Thanks
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
July 26th, 2013 11:00
Good detective work, I am glad you were able to get it working.