Unsolved
This post is more than 5 years old
11 Posts
0
44561
VLAN Routing and Config
I have read through many forums and configurations and am missing something, I hope you guys can tell me what it is. I have a single network 192.168.16.0 VLAN 3. The network has grown and is now subbed out to another company, so vlans were mentioned. I want to create a vlan to separate that company from our network/computers, however they will be sharing our DHCP server and Term Server along with internet connection. I see I have to have a management vlan so I have assigned it to 192.168.11.0 VLAN 1 and the new company 192.168.10.0 VLAN 2. I have not been able to get inter vlan routing to work properly.
running-config
!Current Configuration:
!
System Description "PowerConnect 6248, 3.3.1.10, VxWorks 6.5"
!
System Software Version 3.3.1.10
!
Cut-through mode is configured as disabled
!
configure
vlan database
vlan 2-3
vlan routing 2 1
vlan routing 3 2
vlan routing 1 3
vlan association subnet 192.168.10.0 255.255.255.0 2
vlan association subnet 192.168.16.0 255.255.255.0 3
exit
stack
member 1 2
exit
ip address 192.168.11.210 255.255.255.0
ip default-gateway 192.168.11.254
ip routing
ip route 0.0.0.0 0.0.0.0 192.168.11.254
ip route 192.168.16.0 255.255.255.0 192.168.16.254
ip route 192.168.10.0 255.255.255.0 192.168.16.254
ip helper-address 192.168.16.1 domain
ip helper-address 192.168.16.1 dhcp
interface vlan 1
routing
exit
interface vlan 2
name "VLAN2"
routing
ip address 192.168.10.210 255.255.255.0
ip helper-address 192.168.16.1 domain
ip helper-address 192.168.16.1 dhcp
exit
interface vlan 3
name "VLAN3"
routing
ip address 192.168.16.210 255.255.255.0
exit
dhcp l2relay
dhcp l2relay vlan 2
!
interface ethernet 1/g2 -24 ### to save space
switchport access vlan 3
exit
!
interface ethernet 1/g25 - 36### to save space
switchport access vlan 2
exit
!
interface port-channel 1 - 24 ### to save space
switchport access vlan 3
exit
interface port-channel 25 - 36 ### to save space
switchport access vlan 2
exit
NxG33k
11 Posts
0
July 31st, 2012 14:00
Management Interface:
IP Address..................................... 192.168.11.210
Subnet Mask.................................... 255.255.255.0
Default Gateway................................ 192.168.11.254
Burned In MAC Address.......................... D067.E583.5584
Network Configuration Protocol Current......... None
Management VLAN ID............................. 1
Routing Interfaces:
Netdir Multi
Interface State IP Address IP Mask Bcast CastFwd
---------- ----- --------------- --------------- -------- --------
vlan 2 Up 192.168.10.210 255.255.255.0 Disable Disable
vlan 3 Down 192.168.16.210 255.255.255.0 Disable Disable
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
August 1st, 2012 11:00
I do not see anything left in the config that would cause this kind of behavior. Have we saved the running config and rebooted recently? Sometimes a reboot can help in situations like this.