Unsolved
This post is more than 5 years old
1 Message
0
30557
can i install a 2nd X901C module on the 6248?
Hi,
We have a 6248 L3 switch and already have one X901c module (2-port 10gbase-t) installed on Bay 2. My question is, since we are not stacking, can i install a second X901c module in Bay 1 or is this stricly reserved for a stacking module?
Hope to get a definite answer before we buy the second module.
Thanks!
DELL-Daniel My
Moderator
Moderator
•
6.2K Posts
0
July 5th, 2012 17:00
Hello sunstar_cebu
The short answer is no. Here is a copy/paste from our internal documentation on the 10Gb module:
Thanks