Unsolved
This post is more than 5 years old
160 Posts
0
576086
howto save Running Config File from CLI ?
hi
howto save Running Config File from CLI (telnet) by managed Switch PowerConnect 5224 ?
I mean all new changes after restart will be saved.
kind regards
anonimous
howto save Running Config File from CLI (telnet) by managed Switch PowerConnect 5224 ?
I mean all new changes after restart will be saved.
kind regards
anonimous
DELL-GregG
812 Posts
0
September 17th, 2004 11:00
The command is "copy running-config startup-config". You would then give the configuration a name.
See the following link to the Flash/File section of the online CLI Guide for more information:
<ADMIN NOTE: Broken link has been removed from this post by Dell>
krolk
160 Posts
0
November 19th, 2004 17:00
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
May 3rd, 2017 12:00
I know this is an older thread, but wanted to come back with some updated information for anyone searching.
Here is a KB article with some information on backing up configurations on the PowerConnect, Force10, and N series switches.
http://dell.to/2pIwEdW