Unsolved
1 Message
0
4440
solid orange light on s4048 dell switchport with 1000baseT
Please kindly assist me; i'm fairly new in networking...I have connection from the Data Domain 3300 to a dell switch s4048. Its an optical switch (10G - interfaces) and the Data Domain has only 1G interfaces. So i've put a 1000baseT transceiver on the switch to connect the Data Domain with an ethernet cable. The dell switchport with a connection has a Steady Orange Light and its unreachable. As part of troubleshooting, i made a direct connection to my laptop and statically put my laptop on the same subnet, it was still unreachable. Kindly assist on how to configure the switch port. Current configs :
- as a tagged port
#int te1/1
#no ip
#switchport
#no shut
- as an untagged port
#int te1/1
#no ip
#portmode hybrid
#switchport
#no shut
- port speed is set to 1000, and its on full duplex (these configs, matches with data domain configs) - Thanks in advance
DELL-Josh Cr
Moderator
Moderator
•
8.7K Posts
0
March 20th, 2019 13:00
Hi,
What transceiver are you using? It sounds like it is not compatible with what is being connected at the other end.
erichamm
4 Posts
0
March 21st, 2019 23:00
Thank you for share your knowledge.