Unsolved
This post is more than 5 years old
1 Message
0
14074
Dell N-Series SNMP: Bridge/Mac address table
Hi,
anyone successfully been able to pull dot1dTpFdbAddress ( .1.3.6.1.2.1.17.4.3.1.1 ) from dot1dTpFdbTable( .1.3.6.1.2.1.17.4.3) in The bridge mib? On a Dell N2000 or N3000? To the the mac address table information..
strobl
1 Message
0
July 22nd, 2016 04:00
Hi,
I have the same problem on N2048. On old PowerConnect 5548 all worked fine. Using last FW 6.3.0.16.
When I am searching in mibs files, I have founded article
" dot1dTpFdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1dTpFdbEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table that contains information about unicast
entries for which the bridge has forwarding and/or
filtering information. This information is used
by the transparent bridging function in
determining how to propagate a received frame."
::= { dot1dTp 3 }
dot1dTpFdbEntry OBJECT-TYPE
SYNTAX Dot1dTpFdbEntry
ACCESS not-accessible
"
Looks like this field is not accessible through SNMP query. It is strange, when on 5548's it's possible.
Can anyone help to solve this problem?
Thx
kilian.cavalotti
1 Rookie
1 Rookie
•
29 Posts
0
February 20th, 2018 09:00
It seems to still be the case 2 years later: Dell, could you please explain why the dot1dTpFdbTable OID is not accessible on Nxxxx switches?
MK.W
27 Posts
0
February 21st, 2018 02:00
On N series switch, the dot1dTpFdbAddress not be supported. please refer to "dot1qFdbTable"(dot1q) that been included at vlan.my MIB file.
------