Unsolved
This post is more than 5 years old
5 Posts
0
3833
Dell Networking N4032 OID
Hi Anyone,
Could you please suggest me where to find OIB or MIB file for vlan,cpu and memory to setup the snmp monitoring for dell N4032 switch.
Unsolved
This post is more than 5 years old
5 Posts
0
3833
Hi Anyone,
Could you please suggest me where to find OIB or MIB file for vlan,cpu and memory to setup the snmp monitoring for dell N4032 switch.
Top
vt1012
212 Posts
0
February 22nd, 2018 09:00
Hi Yownlay,
All MIBs come zipped with the firmware download. Here are the memory and cpu OIDs for the N-series.
CPU OID
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.1 (total free memory)
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.2 (total memory)
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3 (Table for the following...)
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3.1.1 (Index)
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3.1.2 (Name of process using CPU)
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3.1.2 (% of CPU used by corresponding process)
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.4.0 (rollup of all CPU activity)
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.9 (shows 5 sec, 60 sec., and 300 sec)
Memory OIDs
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.1
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.2
Oids can be easily searched using a good MIB browser, allowing you to load all of the MIBs at once, search for keywords (i.e. VLAN) to easily find the required OIDs and information you need. Browsers parse out each OID and descriptions for each, making them much easier to read than trying to use a text reader or word processor, and allow you to process all of the files at once.
Hope this helps
-B
yownlay
5 Posts
0
February 26th, 2018 18:00
Hi Dear, Thanks for your reply and i have added cpu and memory OID and tried to pull out data. However it is still not working.I am using PRTG free monitoring tools