Unsolved
This post is more than 5 years old
1 Message
0
7950
March 29th, 2011 06:00
How to achieve port shutdown on dell 5424 switch ?
Hi,
I am trying to shutdown particular port on dell powerconnect 5424 switch using config mode , but it doesn't seem to work . Is there any way we can achieve this ?
swpnst40ggsn14-1# show interfaces status ethernet g9
Flow Link Back Mdix
Port Type Duplex Speed Neg ctrl State Pressure Mode
-------- ------------ ------ ----- -------- ---- ----------- -------- -------
g9 1G-Copper Full 1000 Enabled Off Up Disabled On
swpnst40ggsn14-1#
swpnst40ggsn14-1#
swpnst40ggsn14-1#
swpnst40ggsn14-1# configure
swpnst40ggsn14-1(config)# interface ethernet
swpnst40ggsn14-1(config)# interface ethernet g9
swpnst40ggsn14-1(config-if)# shutdown
swpnst40ggsn14-1(config-if)# end
swpnst40ggsn14-1# show interfaces status ethernet g9
Flow Link Back Mdix
Port Type Duplex Speed Neg ctrl State Pressure Mode
-------- ------------ ------ ----- -------- ---- ----------- -------- -------
g9 1G-Copper Full 1000 Enabled Off Up Disabled On
swpnst40ggsn14-1# show system
System Description: PowerConnect 5424
System Up Time (days,hour:min:sec): 28,06:23:30
System Contact:
System Name: swpnst40ggsn14-1
System Location:
System MAC Address: 00:23:ae:bc:7a:b0
System Object ID: 1.3.6.1.4.1.674.10895.3020
Type: Ethernet Switch
Main Power Supply Status: OK
Fan 1 Status: OK
Fan 2 Status: OK
Unit Temperature (Celsius) Status
------------------------ ------------------------ ------------------------
1 33 OK

