I've obtained a pair of Dell Force10 S25 switches and I'm trying to log into the switches to test / reset them. I have no luck accessing the CLI on either of the switches.
I'm using HyperTerminal, 9600/8/n/1 and I simply get no readout on my screen.
The "stack ID" shows A0 on the unit I'm currently trying and A1 on the other.
I believe these 2 units were stacked together before they were decommissioned. They're not stacked currently while I'm trying to connect to them.
Anyone have any suggestions? Thanks!
What kind of cable are you using, the connection to the console port has to be a straight through cable and not a crossover cable. The settings you have for the terminal are correct. Can you try a different program such as Putty? It is also possible if these were not reset to default that the settings were changed, so you might want to try different baud rates.
Thank you for the help - it is a straight through cable. I'll try each and every baud rate I suppose - and putty. Will report back!
I've tried Putty, a second serial cable, and every baud setting. No go. Any other suggestions? There simply must be a setting I'm missing here, somewhere... its possible there is a problem with the switch, but I doubt we received 2 switches with an identical hardware issue. Is it possible they disabled the CLI somehow?
I am not seeing a way to fully disable the console. Try the steps on page 77 and see if that will reset it http://downloads.dell.com/Manuals/Common/force10-s25p_Reference%20Guide_en-us.pdf
Thanks again for the response - still not having any luck. I've pretty much just mashed the keyboard after powering up the switch (the link you provided states I can press any button during boot to break) and still nothing. Nothing reading on the command interface. This is so frustrating - I don't know what can be wrong here. Especially with 2 units. Tried with multiple serial cables, multiple computers and multiple terminals. Ugh!
Does the console port RJ45 jack show link lights? Have you tried an RJ45 to DB9 cable? Do you know why the switches were decommissioned originally? You may also want to try an IP scanner to see if it has an IP assigned and if you can connect to that.
Thanks for the responses,
I'm starting to think I have no understanding of what a "straight-through" cable is. I've been using a blue cisco RJ-45 to DB-9 female. Part# 72-3383-01 . I need to find a "straight through" cable to work for this switch. As the console is a RJ-45 port, doesn't that mean I'll need an RJ-45 to serial cable?
Can someone point me to a part number or item that would FOR SURE be a straight-through console cable that would work with my Force10 S25?
I am not sure if Cisco wires their cables the same way. http://www.force10networks.com/CSPortal20/KnowledgeBase/DOCUMENTATION/InstallGuidesQuickrefs/S-Serie... page 17 shows the pinout for our cables.
The straight through cable is for RJ45 to RJ45.
OK - it looks like I need an RJ-45 to DB-9 adapter.
I'm pretty novice when it comes to this stuff so thanks for your patience. From what I understand I can't just plug in a ethernet cable from the console port to my computer's NIC and log into the console that way? This is why I'm assuming I need the adapter.