Networking General
Posts
Unsolved
This post is more than 5 years old
Responses(5)
No Events found!
Unsolved
This post is more than 5 years old
192 Posts
0
108692
hi there i am not able to login to the dell 3524p switch.
what is the default login username/password combo?
Top
dirkdigs
192 Posts
0
July 2nd, 2012 14:00
sorry for my typos. these are dell 3524p model switches.
dirkdigs
192 Posts
0
July 2nd, 2012 14:00
dell 3424p
is there any config that i need to do. or that would be best practice with regards to prepping a pair of 3542p powerconnect switches for use on a voip network.
dirkdigs
192 Posts
0
July 2nd, 2012 14:00
hi there i am not able to login to the dell 3524p switch.
what is the default login username/password combo?
DELL-Daniel My
Moderator
Moderator
•
6.2K Posts
0
July 2nd, 2012 15:00
Hello dirkdigs
We do not assign passwords to the switches. If you do not know the password on the switch then you can try deleting the startup-configuration. If there is an enable mode password preventing you from this then you will need to call into support for assistance with recovering the password. Account verification will be required before assistance with recovering the password can be provided.
I don't have a list of best practices for VOIP setup. If you have specific questions regarding the configuration I will do my best to assist.
Thanks
DELL-Kenny K
685 Posts
0
July 3rd, 2012 13:00
Dirkdigs,
As far as the password recovery on the PC 3524P you can go into startup menu and the 3rd option is password recovery procedure. Here is some info from the user guide pertaining to password recovery.
Password Recovery - option[3]
If a password is lost, the Password Recovery procedure can be called from the Startup menu.
The procedure enables entry to the device once without password.
To recover a lost password when entering the local terminal only:
1 From the Startup menu, type [3] and press . The password is deleted.
Enter your choice or press ESC to exit
Current password will be ignored!
NOTE: To ensure device security, reconfigure passwords for applicable management methods.
That will allow you to bypass the password one time and you will then want to assign a password that you will remember. You can view this info at the link below on page 62.
support.dell.com/.../en_ug.pdf
Please let me know if you have any other questions.