Unsolved
This post is more than 5 years old
2 Posts
0
22779
IDrac 7 1.46.45 reporting wrong current value
Hi,
since last update (1.46.45) i have done on my poweredge R620 yesterday, the current displayed on iDrac thru a web browser is not the same than reported thru ipmi query (for my nagios monitoring system).
Example: iDrac show me 0.4 and 0.2 A on my 2 power supplies thru web site, and thru ipmi i have :
Sensor Type(s) current Status: OK | 'Current 1'=0.100000 'Current 2'=0.050000 'Pwr Consumption'=98.000000
the Pwr Consumption is ok, but the 0.1 and 0.05 values are wrong
(240v x (0.4+0.2 A)=144w and (240v x (0.1+0.05 A)=36w !!! the first result is right, near 98w reported by iDrac and similar to the value before the update
It was ok before the update and an another server running 1.20.20 version is ok too.
It's not very serious, but am i the only one ?
nguironnet
2 Posts
0
July 18th, 2014 01:00
It's ok now with the idrac version 1.57.57 (Build 04).
I did not try the intermediate version, but it's ok now !