Error Code 2000-0151 means the Drive is Toast if it has Msg:Hard Drive 0 but it can also mean the optical drive is in Incorrect Status aka there was no disk in the optical drive when the test was run. So you have to give more complete information including a validation code. Hard drive 1 is not the boot drive.
Error code: 2000-0151 incorrect status 32, no additional sense information.
PSA+ 2000-0151 Hard Drive (d): – Incorrect status: (x) (s) Remove and reinstall the Hard Drive
Could be hard drive, or could be the controller on the motherboard. I would try another drive and if that doesn't work it is most likely a motherboard problem.
Considering the relatively low price of used/refurbished Optiplexes that are being sold, I wouldn't put much in the old one.
speedstep
9 Legend
•
47K Posts
0
July 24th, 2018 09:00
Error Code 2000-0151 means the Drive is Toast if it has Msg:Hard Drive 0 but it can also mean the optical drive is in Incorrect Status aka there was no disk in the optical drive when the test was run. So you have to give more complete information including a validation code. Hard drive 1 is not the boot drive.
Error code: 2000-0151 incorrect status 32, no additional sense information.
PSA+ 2000-0151 Hard Drive (d): – Incorrect status: (x) (s) Remove and reinstall the Hard Drive
https://www.youtube.com/watch?&v=T4YZebIiiRs
This means the drive is dead or dying and the PSA cannot find an OS on the drive.
fireberd
9 Legend
•
33.4K Posts
0
July 24th, 2018 03:00
Could be hard drive, or could be the controller on the motherboard. I would try another drive and if that doesn't work it is most likely a motherboard problem.
Considering the relatively low price of used/refurbished Optiplexes that are being sold, I wouldn't put much in the old one.