Unsolved
This post is more than 5 years old
3 Posts
0
3836
3060, does not support forcepxeonnextboot
We use the Dell Command Configure software to sometimes reboot our workstations and let them do a pxe boot. Since we are using this we never ran into problems, until we received the Optiplex 3060. Optipex 3050 was still working.
Normally all we have to do is install dell command configure and use the command
cctk.exe --forcepxeonnextboot
When we do this on a Optiplex 3060 we get the message:
The option 'forcepxeonnextboot' is not available or cannot be configured through this tool
This is really a problem for us, because we use this feature to image our workstation without having to go the physical workstation. It's a kind of ZTI. Does anyone know if we are doing something wrong here? Is the option we are using deprecated? Is there another way to achieve the same? Is this a bug?
Any help is appreciated. Thanks in advance.
DELL-Alasdair R
4 Operator
4 Operator
•
754 Posts
0
September 14th, 2018 05:00
Hi Freecourt,
What version of DCC are you using?
Does the command appear in the list if you try cctk.exe -H?
If you could let us know, thanks.
Freecourt
3 Posts
0
September 18th, 2018 07:00
Hi,
We are using this version: Dell Command Configure Version 3.2.0 209 (Windows - Jan 20 2017, 23:13:19).
When I use this software on a 3040 with exact the same OS and other software I do see the option but not on a 3060 (Micro form factor). We are using MS MDT to image both desktops,so the distribution of software shouldn't be an issue.
Thx anyway for looking into this.
Robert
DELL-Alasdair R
4 Operator
4 Operator
•
754 Posts
1
September 18th, 2018 08:00
Hi Robert
Can you try the current version of DCC (v4.1)?
https://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=2KRXV
The 3060 isn't listed as a supported platform for the version you're running and subsequently there have been a lot of changes to the DCC software (and also on the hardware side of things)
If you still have the same issue with 4.1 let us know and we can dig a bit deeper.
Thanks.
Freecourt
3 Posts
0
September 19th, 2018 02:00
Hi,
Today I downloaded the version you recommended us. I installed it on a fresh install of windows 10 1607 LTSB on a Optiplex 3060 and on a Optiplex 3050. Unfortunately the results are the same.The 3060 doesn't show us the option and the 3050 does show the option when cctk -h.
So using the new version didn't help us. Too bad, it was a good option.
DELL-Alasdair R
4 Operator
4 Operator
•
754 Posts
0
September 19th, 2018 04:00
Hi Robert,
Thanks for trying that. I'm thinking that it might be something to do with the boot options that are selected, since the newer generation of systems only support legacy booting from external devices.
I've sent you a Private Message for further information.
sarel_disd
1 Message
0
February 12th, 2019 12:00
tOjOr
2 Posts
0
May 29th, 2019 01:00
eborion
1 Message
0
February 9th, 2023 07:00
Has anyone found a solution or workaround for this? I have the same issue on a Vostro 5590 with the latest BIOS.
bradthetechnut
6 Professor
6 Professor
•
8.2K Posts
0
February 9th, 2023 16:00
It might also help if you post in the Vostro forum if not already.