Unsolved
7 Posts
0
2945
5060, not able to boot after cloning
We bought an optiplex 5060 and as usually I instal an ssd that I clone first and I remove the old drive.
This time , i made the clone but the computer wouln't boot . I tried many different tuning but legacy is not present in this uefi bios .
I checked my ssd on another computer as slave and the partitions were ok : GPT .
I have tried aoemei , hdclone , acronis but the result was the same .I contacted the miray support but they did not find the right solution .
The first error code was : Error Code 0xc00000e
I made seaches and tried every solution .
I assume it must be something new in this bios . Is there somebody that knows this problem .
I assume we are going to encounter this in the new dell generation .
Thank you for your help .
PM
68cutlass
192 Posts
0
April 29th, 2019 11:00
Have you tried creating and restoring from an image? I've had issues with cloning enough that I almost never do so now and use images. I use an older version of Acronis mainly but occasionally use others.
speedstep
9 Legend
9 Legend
•
47K Posts
0
April 30th, 2019 07:00
Recovery
Your PC/Device needs to be repaired
A required device isn't connected or can't be accessed.
Error code: 0xc000000e
You'll need to use recovery tools. If you don't have any installation media (like a disc or USB device), contact your PC administrator or PC/Device manufacturer.
Symptom 1: 0xc000000e error screen on startup
Causes of this Error
Cause 1: BCD is invalid
Cause 2: File system integrity compromised
Cloning is not supported by Dell or Microsoft.
Windows 7 shows more
The application or operating system couldn't be loaded because a required file is missing or contains errors.
File: \WINDOWS\system32\winload.exe
Error code: 0xc000000e
mikapat
7 Posts
0
May 2nd, 2019 10:00
No , my aim is to do it as fast as possible . Creating an image and restoring takes too much time . Anyway ,I will give it a try . Thank you .I have a software with a Miray dongle that I pay a lot that always does the job but this time with this computer :not
I assume that Dell must have done something with the uefi
mikapat
7 Posts
0
May 2nd, 2019 10:00
Yes , this is the problem . What is your solution ?
Tesla1856
8 Wizard
8 Wizard
•
17K Posts
0
May 2nd, 2019 13:00
I don't support this exact machine (rather my experience is with similar OptiPlex 5050-SFF ... which are flawless).
In general, I have no problems cloning or imaging with Macrium Reflect 7 Free
... on Dell, Alienware, and newer UEFI-capable systems.
https://www.dell.com/community/Alienware-Desktops/Aurora-R7-M-2-NVMe-bootable-options/m-p/6073081/highlight/true#M3401
mikapat
7 Posts
0
May 2nd, 2019 21:00
Thanks . Do you clone your hd under windows or booting before windows with some kind of dos or linux ?
speedstep
9 Legend
9 Legend
•
47K Posts
0
May 3rd, 2019 04:00
Cloning is not supported by Dell or Microsoft.
https://support.microsoft.com/en-us/help/314828/the-microsoft-policy-for-disk-duplication-of-windows-installations
There was an issue with SECURITY ID aka SID and cloning.
The major problem that every cloned system has an identical Computer Security Identifier (SID).
Mark Russinovich’s NewSID has been retired and is no longer available for download.
NewSID Retirement and the Machine SID Duplication Myth
Norton had a utility called Ghost Walker for this.
When Microsoft Changed to secure Boot Norton stopped supporting GHOST with windows 8.
https://community.norton.com/en/comment/4371993
Acronis True Image
Supports Windows 8 but only:Supported File Systems FAT16/32, NTFS, Raw Image support
http://www.acronis.com/homecomputing/products/trueimage/#requirements
Paragon Hard Disk Manager Suite 12 (SP3)
New update released supports Windows 8
• Full support of Windows 8
• Support of GPT/uEFI configurations to successfully clone, migrate, or restore a 64-bit Windows configured to the uEFI-based boot mode
http://www.paragon-software.com/index.html
Macrium Reflect 7 Free Edition
https://www.macrium.com/reflectfree