Unsolved
2 Posts
0
2938
Dell 7050 Micro error code 3,6?
Hi!
I have a trouble with compact version 7050.
It does not start (black screen, no beep sounds). After power on led lights white steady about 15 sec, than it start blinking (3 yellow + 6 white). It seems that i have issue with memory banks, (like error 3, 6 on Desktops), but i can't check it. this unit have only 1 module of ram (4 version for notebook: i can't write different because this site spell checking) and i haven't any replace nearby.
If i pull out memory module, then it beeps 1-3-2 and led is blinking 3 yellow.
redxps630
9 Legend
9 Legend
•
11.7K Posts
0
January 25th, 2022 16:00
re: it start blinking (3 yellow + 6 white)
are you sure it is not flashing amber all the time?
Amber LED blinking pattern : The pattern is 2 or 3 blinks followed by a short pause then X number of blinks. The repeated pattern has a long pause inserted in the middle.
3 blinks > short pause >
6 blinks > long pause > repeats
Fatal system board failure detected.
Norman_krsk
2 Posts
0
January 25th, 2022 19:00
There is 2 leds on fron panel: on power button (PB) and hdd activity led (HDD)
All pattern after power on:
PB_Amber->(no pause)->PB_White(steady for about 15 sec)->HDD(once for half second)+PB_Amber(blink 3 times)->pause 2 sec->PB_White( blink 6 times)->pause 4 sec
and repeats continuous
PB_Amber(blink 3 times)->pause 2 sec->PB_White( blink 6 times)->pause 4 sec
PB = power button led.
I've checked SODimm module - it is working fine on another motherboard.
Battery voltage was 2.94v, i've replaced it with new one - nothing changed
redxps630
9 Legend
9 Legend
•
11.7K Posts
0
January 25th, 2022 20:00
try Real Time Clock (RTC) reset
The Real Time Clock (RTC) reset function allows you to recover Dell systems from No POST/No Power/No Boot situations. The legacy jumper enabled RTC reset has been retired on these models.
Start the RTC reset with the system powered off and connected to AC power. Press and hold the power button for 20 seconds. The system RTC Reset occurs after you release the power button.
Youo
1 Rookie
1 Rookie
•
1 Message
0
July 1st, 2024 22:53
What dose failure mean