Push the release tab on the card-retention latch outward.
Pull the release lever away from the PCIe x16 card to release the securing tab from the dent in the card. Then, ease the card up and out of its connector and remove it from the computer.
Lift the PCIe x1 expansion card (if any) up and out of its connector and remove it from the computer.
redxps630
9 Legend
9 Legend
•
11.7K Posts
1
December 31st, 2020 19:00
Push the release tab on the card-retention latch outward.
Pull the release lever away from the PCIe x16 card to release the securing tab from the dent in the card. Then, ease the card up and out of its connector and remove it from the computer.
Lift the PCIe x1 expansion card (if any) up and out of its connector and remove it from the computer.
see p.11
https://downloads.dell.com/manuals/all-products/esuprt_desktop/esuprt_optiplex_desktop/optiplex-3010_owner%27s%20manual2_en-us.pdf