Unsolved
This post is more than 5 years old
15 Posts
0
55480
Dell PowerEdge T110 II and 220v power
I recently purchased a PE T110 II for our church but discovered that our church uses a 220v power supply system to connect to our main BackUPS system. In the past, I've worked with Dell Servers that had a switch in the back of the tower unit that allowed me to select 115v or 220v. This T110 II does not have it. How do I set the server to accept 220v?
leslie_blanke
4 Posts
1
June 10th, 2015 10:00
The server will auto sense the voltage. You will need a c13/c14 power cord to plug it into a 208v power source.