Unsolved
This post is more than 5 years old
11 Posts
0
5023
Disk arrays in OMPC
Hi.
I'm getting familiar with OMPC 3.2. It looks very promising but how can I pull data from Dell MD32 and MD34 arrays?
Yemi
Unsolved
This post is more than 5 years old
11 Posts
0
5023
Hi.
I'm getting familiar with OMPC 3.2. It looks very promising but how can I pull data from Dell MD32 and MD34 arrays?
Yemi
Top
YemBot
11 Posts
0
February 10th, 2017 01:00
Hi Pavan.
I would really like to incorporate the power readings from the MD arrays so we have a complete view of rack power consumption.
--------
Yemi
Hi
DELL-Pavan K
18 Posts
0
February 10th, 2017 01:00
Yemi,
MD arrays are not supported in OMPC.
May i know which data you are looking for?
Thanks
Pavan
DELL-Pavan K
18 Posts
0
February 10th, 2017 03:00
Yemi,
Your requirement of Rack power consumption complete view can still be fulfilled in OMPC through PDUs.
Thanks
Pavan
YemBot
11 Posts
0
February 9th, 2018 12:00
I upgraded from OMPC 3.2 to version 4. I'm still interested in monitoring MD32/34 hardware RAID arrays in OMPC because we could track events such as failed drives using a single integrated tool.
------
Yemi
DELL-Pavan K
18 Posts
0
October 10th, 2018 01:00
Yemi,
OMPC is focused on power and thermal management of servers.
I would recommend you to use OME for your requirement of monitoring drive failure events.
https://www.dell.com/support/article/us/en/04/sln310714/openmanage-enterprise?lang=en
Thanks
Pavan